System Connections - B&G H1000 Bedienungsanleitung

system connections

connections
Bus cable
2
System components share data together via a common Fastnet
databus and are supplied with bayonet connectors for ease of
installation. A selection of cable lengths are available with options for
straight and right angle connectors to suit most requirements.
Bus cable
Bus cable
"HUB"
To prevent the occurrence of voltage drops on larger systems, the
power supply to the system should either be placed mid-way or at both
2
ends of the Fastnet databus. To connect power to the mid-point of the
system, it is recommended that the 4-Way Hub be used. The 4-Way Hub
12V power cable
offers two advantages. The first advantage is that it offers a convenient
entry point for power onto the system. The second advantage is that it
conveniently allows the system to be branched to reduce the overall
2
length of the system. The correct selection of Fastnet cable will negate
the need for any plugs to be removed from the system and ensure years
of faultless operation.
www.bandgservice.co.uk