Built-In-Test - Safran Vectronix Terrapin X Benutzerhandbuch

BUILT-IN-TEST

Press and release the push button to turn on the
X
device.
The electronic aiming mark appears.
Click the push button 5 times in rapid sequence.
X
The Built-In-Test procedure starts automatically
à Display test – the electronic aiming mark, all display
segments and all symbols should be illuminated.
à Submodules test
à Memory integrity test
At the end of the test the result PASS or FAIL will be shown for a moment.
If FAIL is displayed please contact the customer service.
26
5×