Scan Mode - Safran Vectronix Terrapin X Benutzerhandbuch

SCAN MoDE

The device can also be used for continuous range measurements (scan mode).
Press and release the push button to turn on the device.
X
The electronic aiming mark appears.
Press and hold down the push button for more than two seconds to activate the
X
scan mode.
22
à Depending on the configuration, the measurement data will be trans-
mitted via Bluetooth to a receiving device (e.g. Smartphone or Kestrel
Weather Meter).
à A fast flashing Bluetooth symbol is indicating a Bluetooth connection
error.
> 2 s