Using The Jpeg Viewer; Before Using The Jpeg Viewer; Jpeg Viewer Setup - Pioneer SVM-1000 Bedienungsanleitung

USING THE JPEG VIEWER

USING THE JPEG VIEWER
JPEG files can be loaded and displayed from USB memory devices and SD cards. Up to eight JPEG files can be loaded.
USB
HI
JPEG
VIEWER

BEFORE USING THE JPEG VIEWER

Insert a USB memory device or SD card into this mixer.
Using a USB memory device
Insert a USB memory device containing JPEG files to the USB
connector. Only USB memory devices formatted in FAT32 format
can be used.
Using a SD card
Insert a SD card containing JPEG files into the SD CARD slot.
• The memory card used must be formatted according to "SD
Memory Card Specifications Part2 FILE SYSTEM
SPECIFICATION Version1.0" (SD memory cards are formatted in
the aforementioned standard upon shipping from their
manufacturers). Unformatted memory cards cannot be used.
• Memory cards formatted on computers or digital cameras may
not operate properly.
• Multi-media cards (MMC) cannot be used.
• Do not remove the card or turn the power off while the CARD
indicator is blinking (doing so may result in damage to the
stored data).
• Memory cards are delicate electronic devices. Do not bend
them, subject them to strong shocks or impacts. Additionally,
do not use or store memory cards in environments likely to
create static electricity or electrical noise.
• Memory cards may be damaged when exposed to impacts or
static electricity. Handle them with care. It is strongly suggested
that you periodically make copies of important data.
• Pioneer will not be held responsible for any loss of data or direct/
indirect damages.

JPEG VIEWER SETUP

1
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0 0
SD
CARD
CARD indicator
1
2
3
4
5
6
7
8
9
Press the JPEG VIEWER button.
The JPEG play mode screen will appear.
9
1 1
2 2
3 3
5
6
Sets the JPEG play mode to MANUAL.
[MANUAL
MODE] button
[AUTO MODE] Sets the JPEG play mode to AUTO.
button
[FADER MODE] Sets the JPEG play mode to FADER.
button
[TIME] display/ When in AUTO mode, sets the time for
changing the JPEG images.
Change buttons
[JPEG BOX] Selects the JPEG images that are to be
assigned to the channels.
Sets the channel to which JPEG images
Channel select
are to be assigned.
buttons
Alternatively use to cancel the assigned
JPEG.
[JPEG SELECT] Enables JPEG select mode.
button
If operated when effects are ON, a
warning message will appear and the
screen will not change to the next menu.
[CLEAR] button Alternates JPEG BOX clear mode ON/
OFF.
Exits JPEG viewer setup.
[EXIT] button
7
4
8
31
En