Conformity Information; Troubleshooting - Silvercrest SWV 300 C1 Bedienungsanleitung

Conformity information

This device meets the basic requirements and other relevant regulations of the Low Voltage
Directive 2006/95/EC, the R&TTE Directive 1999/5/EC, the ErP Directive
2009/125/EC and the RoHS Directive 2011/65/EU. The Declaration of Conformity can
be found at the end of this manual.

Troubleshooting

You can solve most problems yourself using the following table. If the problem still persists after you
have worked through these approaches, contact our service hotline (see page 78). Do not perform any
repairs personally!
The Power/WPS LED (2) does not light up.
 Check whether the main switch (10) is in the "ON" position.
 Socket defective or fuse tripped; use another device to check the socket.
No wireless connection to the wireless router
 The distance to the wireless router is too great, thus reduce it.
 The router's wireless function is disabled; enable the wireless function.
SilverCrest SWV 300 C1
English - 75