Safety and maintenance information
–
Ensure that all electrical connections (including cable connections) to other devices
meet their related guidelines and conform to the operating instructions.
–
Ensure that sockets and extension cables are not overloaded due to the risk of fire
and electric shock.
–
In the case of any doubt concerning the operation, safety or the connection of the
devices, please contact a specialist.
–
Keep all parts in a safe place out of the reach of children.
–
Please do not keep them in moist, very cold or hot areas; this can lead to damage of
the electronic circuits.
–
Avoid hard shocks to the equipment; this can also lead to electronic circuit damage.
–
Only authorized specialists should be allowed to open and repair the equipment.
–
Wireless systems are subject to interference from wireless telephones, microwave
ovens as well as other electrical equipment operating in the 433 MHz range.
Ensure a MINIMUM DISTANCE OF 3 METRES during installation and operation.
Maintenance
As the smoke detectors are maintenance–free, please do not open them.
!
Your warranty will expire if you open the devices. Clean the outside of the devices
with a dry, soft towel or a brush.
Do not use any cleaning materials containing carboxylic acid, petrol, alcohol or similar
substances. These materials attack the surfaces of the devices and their vapours are both
harmful to health and are explosive. Do not use any pointed tools, such as screwdrivers,
wire brushes, to clean the devices.
Specifications
Alarm signal:
Working frequency:
Operating temperature:
Operating distance:
Transmitter / Receiver batteries:
Smoke detector battery:
Networked devices:
≥ 85dB
433.92 MHz
–5° C to +40° C
40m
3x 1.5V LR6/AA Pair Deer
1x 9V 6F22 Pair Deer
max. 15 devices per group
-17-