Swisscom Centro Business Einrichten Seite 10

2. Starting your router
Have you set everything up according to the instructions? If so, now turn the router on.
Wait until the Internet and power LEDs are constantly white (this can take 10 minutes or
more. The LEDs may flash rapidly during this time). Only then is the router ready and able to
connect to the Internet.
Internet
Power
Tip: By placing the router in an upright position, you can prevent it overheating and achieve
better WLAN coverage.
3. Connecting a PC / laptop to the router
Switch on your PC/laptop and ensure that it is connected to the router with the Ethernet
cable (white cable with yellow plugs). Your computer is now connected to the Internet via the
Centro Business router. Instructions on setting up your WLAN can be found on the next page.
4. Registration
With a new installation, the Swisscom registration page will open automatically after you
launch your browser for the first time. Fill in the obligatory fields step by step. You will find
information about this in your Swisscom documentation. Existing customers do not need
to register.
Congratulations! You are now connected to the best Internet service in Switzerland.
Instructions on setting up your WLAN can be found on the next page.
18
Router settings
> You can enter your WLAN settings directly on the router and in the Swisscom
Customer Centre at www.swisscom.ch/customercentre
> In order to enter settings directly on the router, connect your computer to the Centro
Business router using the Ethernet cable. After entering the URL http://192.168.1.1
in your Internet browser, you can adjust your settings.
> You can also find further information at www.swisscom.ch/centrobusiness.
Was the installation successful?
Test whether the installation was successful by checking the following:
> Are the power and Internet LEDs white?
> If you have installed telephones: make a phone call.
> Are web pages in your browser correctly displayed?
> If you have installed a TV: switch on the TV and setup box and
check whether you can receive the required channels.
Were all the tests successful? If so, you have completed the installation.
We hope you enjoy using your new router.
Do you need help with the installation?
> LED indicators and troubleshooting (page 29)
> www.swisscom.ch/centrobusiness
> Freephone number: 0800 055 055
19