System Setting - SKYTRONIC 351.174 Betriebsanleitung

SYSTEM SETTING

BASICAL
Get into the [BASICAL]menu under [Configuration]
[System Time] set the HD record system time
Note: Please click the "save" button to save the time after setting
[Daylight Saving Time (DST)] Enable the function and click "Set" to enter the local DST starting and ending time setting.
[Date Format] Modify the date display format
[Date Separator] Select the separator for date
[Time Format] 24hr or 12hr display mode
[Time Zone] Select the time zone
[Language] Select language (different models have different language choice)
[Auto Logout] Set menu stand-by time from 0-60 min. O min means no standby; if set a time, system will logout auto after
this period time and user need to login again.
[DVR No.] Used for a remote control or keyboard control multiple devices. Please click "Ad" button on remote control and
input the corresponding DVR number to operate.
[Video Standard] PAL/NTSC (must keep the same with the front-end camera)
[Startup Wizard] Enable switch, open/close the startup wizard interface
[Device Name] Used together with the push, display this device name in the alarm message received in iPhone.