Troubleshooting Guide - Kenwood KAX720PL Bedienungsanleitungen

troubleshooting guide

Problem
The attachment will not start/
does not operate.
The juicer has stopped during
normal operation.
Juice is leaking from
underneath the bowl.
Juice does not exit juicing
outlet.
Too much pulp coming out
in juice.
Wiper holder not rotating.
There is a squeaking noise
when juicing.
Staining on juicing parts.
137676 Iss 1 KAX720PL A5 multilingual.indd 8
Cause
• No power.
• Juicing bowl not properly aligned on
drive unit or lid not locked correctly.
• Clogging in filter and scroll.
• Food not cut into small enough
pieces.
• Juicer overloaded due to heavy
load.
• Pulp stopper not fitted or has come
loose during operation.
• Anti-drip stopper closed.
• Filter or scroll clogging.
• Very fibrous fruit/vegetable being
processed.
• Filter or scroll not located correctly.
• Friction between wiper holder and
bowl.
• Natural colouring from food.
8
Solution
• Make sure the appliance is
plugged in.
• Check that all parts are fitted
correctly.
• Do not attempt to open the lid by
force.
• Switch off, unplug remove the
attachment from the Kitchen
Machine. Remove the lid. Check
if any clogging. Remove food if
necessary and continue juicing.
• Switch off, unplug remove the
attachment from the Kitchen
Machine. Take the juicer apart.
Clear and reassemble the juicer.
• Check that the pulp outlet
stopper is fitted correctly.
• Remove stopper and allow juice
to flow into juice container.
• Cut food, especially fibrous
foods, into smaller pieces to
avoid the fibres wrapping around
the scroll.
• Check and ensure attachment
assembled correctly.
• Normal operation.
• Do not operate the attachment
empty.
• Rubbing with a cloth dipped in
vegetable oil will help to remove
discolouring.
13/12/2017 14:27