Overhaul; Disposal; Troubleshooting Checklist; Warranty - Terrier TBLC Gebrauchsanleitung

8

OVERHAUL

At least once a year, or if occasioned by damage to the clamp, the TBLC safety lifting clamp
should be inspected, tested and, if necessary, overhauled by Terrier Lifting Clamps BV or a
recognized mechanical repair and service center.
9

DISPOSAL

Once the TBLC safety lifting clamp has reached the end of its useful life, it can be treated
as scrap iron, provided that the clamp is rendered unfit for use.
10 TROUBLESHOOTER'S CHECKLIST
Failure/malfunction
load slips
Body bent
Lifting eye oval
Spindles bent
spring pins missing
Clamp opens/closes stiffly
11

WARRANTY

Terrier Lifting Clamps provides a 5 year warranty on its lifting clamps. This warranty is ap-
plicable to the original end user of the lifting clamps. Only if the clamp has been inspected,
checked and maintained by this instructions and by an official dealer. This warranty period
of 5 years is valid from the day of purchase, and is liable to all conditions and measurements
stated in this document.
11a CONDITIONS
This warranty only covers failures in the lifting tools which is the consequence of produc-
tion errors which occur during normal use. The warranty covers no wear to components
such as pivots, pressure feet, cam assemblies, lock springs etc. Should there be any kind of
failure within this guarantee period, the lifting tool will be replaced or repaired to insight
of the producer.
No warranty is given to clamps due to the following failures:
- Regular wear.
- Overload.
- Wrong and/or carelessly use.
- Damages.
- Not following procedures and measures.
- Hoisting differing material other than indicated on clamp or stated in the user-manual.
- Adapting and/or modifying of the Terrier clamp.
Possible Cause
Load dirty
Clamping jaws dirty
Legs bent open
Clamp overloaded
Clamp overloaded
Clamp overloaded
Incorrect installation
Clamp worn
Clamp dirty
Bolts fitted too tightly
Action
Clean load
Clean clamping jaws
Reject clamp
Reject clamp
Reject clamp
Reject clamp
Fit new spring pins
Reject clamp
Clean clamp
Adjust the bolts
13