Befehlsliste - Bicker DC2412-UPSD Benutzerhandbuch

15 Befehlsliste

Der Befehlsindex (Command Index) ist immer 0x03.
GetInputVoltage() 0x25
This read-word function shows the measured input voltage of the UPS.
Cmd
0x25 GetInputVoltage()
Transfer packet:
GetOutputVoltage() 0x27
This read-word function shows the measured output voltage of the UPS.
Cmd
0x27 GetOutputVoltage()
Transfer packet:
GetInputCurrent() 0x28
This read-word function shows the measured input current of the UPS.
Cmd
0x28 GetInputCurrent ()
Transfer packet:
GetChargeCurrent() 0x29
This read-word-function shows the measured charge current of the UPS.
Cmd
0x29 GetChargeCurrent ()
Negative numbers indicate a discharge.
Transfer packet:
GetCapStackVoltage() 0x26
This read-word-function shows the measured voltage at the capacitor stack of the UPS.
Cmd
0x26 GetCapStackVoltage()
Transfer packet:
22
DC2412-UPSD | DC2412-UPS-LDD | UPSIC-1205D | UPSIC-2403D
Name Access
0x01 0x03 0x03 0x25 0x04
Name Access
0x01 0x03 0x03 0x27 0x04
Name Access
0x01 0x03 0x03 0x28 0x04
Name Access
0x01 0x03 0x03 0x29 0x04
Name Access
0x01 0x03 0x03 0x26 0x04
Type Min.
R Int16
Type Min.
R Int16
Type Min.
R Int16
Type Min.
R Int16 -32768
Type Min.
R Int16
Max Unit
0 32768 mV
Max Unit
0 32768 mV
Max Unit
0 32768 mA
Max Unit
32768 mA
Max Unit
0 32768 mV