Tests/Approvals; Items Supplied - IFM Electronic GM503S Betriebsanleitung

4. Tests/approvals

The fail-safe switch was tested in accordance with:
•
98/37/EEC European machinery directive
•
73/23/EEC or 93/68 Low voltage directive
•
89/336/EEC EMC directive or 93/68/EEC
•
DIN V VDE 0801: (1990) and amendment A1: (1994) Principles for
computers in safety-related systems
•
DIN V 19250: (1994), Requirement class AK 4, Fundamental safety
aspects to be considered for measurement and control equipment
•
DIN V 19251: (1995) MC protection equipment - Requirements and
measures for safeguarded function
•
EN 954-1: (1997) Category 3, Safety of machinery. Safety-related
parts of control systems
•
EN 60204-1: (1997) (where applicable) Electrical equipment of ma-
chines
•
EN 60947-5-2: (1998) Low-voltage switchgear and controlgear -
Control and switchgear - proximity switches
•
EN 60947-5-3: (1999) Low-voltage switchgear and controlgear -
Control circuit devices and switching elements - Requirements for
proximity devices with defined behaviour under fault conditions

5. Items supplied

1 fail-safe switch GM503S with premounted angle bracket,
1 Allen key for fixing the fail-safe switch onto the angle bracket,
1 x operating instructions GM503S, ident no. 701682.
If one of the above-mentioned components is missing or damaged,
please contact one of the ifm branch offices overleaf.
The fail-safe inductive switch GM503S has
been certified by TÜV.
15