Replacing The Battery - VITLAB pipeo Gebrauchsanleitung

10. Replacing the battery

Warning!
Only use original manufacturer's accessories (page 35). The battery
must not be replaced by non-rechargeable or rechargeable batteries
of other manufacturers.
Use of the wrong batteries or improper use of the instrument (e.g.,
short-circuit, mechanical damage, overheating, etc.) may cause the
batteries to explode.
1. To open the battery compartment press at the
embossed arrow, position Œ, and simultane-
ously slide cover back.
2. Remove the battery.
3. Grip battery plug by the wire and pull it gently
out of the socket.
4. Grip the plug of the new battery by the wire
and push it firmly into the socket until you can
hear it is snapping in.
5. Insert new battery and close battery compart-
ment.
32