KEF SLIBETTE 6 Bedienungsanleitung Seite 22

7. Keep children away. All visitors should keep
a good distance from the work area.
10. Do not overload the machine. It can carry
out the job better and more safely if you use it
for the purpose it was designed for.
12. Wear correct clothing. Do not wear loose
clothing, gloves, ties, rings, necklaces or other
jewellery that could get caught in the moving parts.
Non-slip footwear is recommended. Wear
protective headgear.
13. Always use eye
protection and perhaps ear
protection. Also use face or
dust masks for a dusty job.
Ordinary spectacles only
function as glass. They are
NOT adequate eye
protection.
16. Maintain the tool carefully. The
best and safest work is achieved
by keeping the tool sharp and
clean. Follow the instructions when
lubricating and replacing spare
parts.
9. Make your workshop childproof by using a tool lock, a
line breaker or by removing start keys.
15. Know your reach. Keep your
balance and a good foothold all the
time.
18. Switch off the power to the tool before servicing and
when replacing spare parts e.g. grinding wheel, polishing
wheel, knives, blades, milling cutters and similar.
19. Use recommended spare parts. Look in the
manual for recommended spare parts. Using
obsolete spare parts can lead to people being injured.
11. Use the right tool. Do not force the tool or
unit to carry out a job it was not designed to
do.
14. Work safely. Use clamps or vices
to hold the material in place. This is
safer than using your own hands, and
you can then use both hands to
operate the tool.
17. Reduce the risk of
starting the machine
unintentionally. Make sure
the power switch is off.
21
6. Avoid dangerous work environments. Do
not use machine tools in damp or wet
premises and do not expose them to rain.
Make sure you have good working light.