Sony HVL-F56AM Bedienungsanleitung Seite 40

[1] Photography with wireless flash
Use only an off-camera flash unit, using the light from the built-in flash as
a signal.
1
Attach the flash to the camera and turn the power of
the flash and camera on.
2
Set the camera to wireless flash.
• When the camera is set to wireless the flash is also set to wireless
automatically, and WL is displayed on the data panel.
The flash channel information is transmitted to the camera.
3
Remove the flash from the camera and raise the built-
in flash.
4
Set up the camera and flash.
• See page 38 for details.
40