General Safety Information; Setting Up The Device; Repairs - Philips PicoPix PPX5110 Bedienungsanleitung

1 General safety information

Do not make any changes or settings that are
not described in this user manual. Physical
injury, damage to the device or loss of data can
result from improper handling. Take note of all
warning and safety notes indicated.

Setting up the device

The device is for indoor use only. The device
should be placed securely on a stable, flat sur-
face. Position all cables in such a way that no
one will trip over them, thus avoiding possible
injuries to persons or damage to the device
itself.
Do not operate the device in damp rooms.
Never touch the main cable or the main connec-
tion with wet hands.
The device must have sufficient ventilation and
may not be covered. Do not put your device in
closed cabinets or boxes if it is in use.
Protect the device from direct sunlight, heat,
intense temperature fluctuations and moisture.
Do not place the device in the vicinity of heaters
or air conditioners. Observe the information on
temperature and humidity in the technical data
(see Technical data, page 19).
When the device is on for a long time, the sur-
face becomes hot and a warning symbol
appears. The device switches automatically to
stand-by mode when it gets too hot.
Do not allow liquids to leak into the device. Turn
off the device and disconnect it from the main
supply if liquids or foreign substances leak into
the device. Have the device inspected by an
authorised service centre.
Always handle the device with care. Avoid
touching the lens. Never place heavy or sharp
objects on the device or the power cable.
If the projector gets too hot or emits smoke, shut
it down immediately and unplug the power
cable. Have your device checked by an author-
ised service centre. Keep device away from fire.
The battery is integrated with the device. Do not
dissemble and modify. The battery should be
replaced by qualified service staff only.
DANGER!
Risk of explosion with incorrect type of
batteries!
Do not try to replace the battery your-
self.
4
Under the following conditions, a layer of mois-
ture can appear inside the device which can
lead to malfunctions:
• if the device is moved from a cold to a
warm area;
• after a cold room is heated;
• when this device is placed in a damp
room.
Proceed as follows to avoid any moisture build-
up:
1 Seal this device in a plastic bag before mov-
ing it to another room, in order for it to adapt
to room conditions.
2 Wait one to two hours before you take the
device out of the plastic bag.
The device should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the device.
Do not expose the device to extreme vibrations.
It may damage the internal components.
Do not allow children to handle the device with-
out supervision. The packing materials should
be kept out of the hands of children.
For your own safety, do not use the device dur-
ing thunderstorms with lightning.

Repairs

Do not repair the device yourself. Improper
maintenance can result in injuries or damage to
the device. Your device must be repaired by an
authorised service centre.
Find details of authorised service centres on the
warranty card.
Do not remove the type label from your device;
this will void the warranty.
Philips · PPX5110