Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Philips PicoPix PPX5110 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PicoPix PPX5110:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25

Troubleshooting

Power cycling
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
1 Turn off the device by pressing the B button
for eight seconds.
2 Wait at least ten seconds.
Problems
How to switch on/off the projector.
What can I do when the projector does not
charge or cannot be switched on?
What can I do when the projector cannot be
turned off?
How can I connect an external device via HDMI? •
The image from the external HDMI device does
not appear.
What to do if Screen Mirroring does not work
anymore after a firmware update of an Android
or iOS device?
Screen mirroring doesn't work with my Android
device.
Service
3 Turn on the device by pressing the B button
for eight seconds.
4 Use a small pin and push it gently in the small
Reset hole.
5 Turn on the device by pressing the B button
for eight seconds.
6 If the problem persists, please contact our
technical service centre or your dealer.
Solutions
Press and hold the B button for eight
seconds.
Most likely the battery is completely empty.
First try to charge the projector for at least
four hours.
If this does not work, use a small pin and push
it gently in the small Reset hole.
Use a small pin and push it gently in the small
Reset hole. If it does not work, disconnect the
power cable.
The HDMI connector of the projector is far
too small for a standard HDMI cable. You
need to use a HDMI to mini HDMI cable to
connect an external device to the projector.
Disconnect the HDMI cable or switch off the
HDMI device.
Wait three seconds.
Reconnect the HDMI cable or switch on the
HDMI device again.
We recommend checking regularly for new
firmware of your projector (see Wireless
firmware update, page 16).
In order to allow screen mirroring, your device
must support Miracast. Not all Android
phones support this function. Very often it's
also hidden with different names such as
Screencast, Screen Sharing, Wi-Fi Direct,
Wireless Display etc.
Please refer to the user manual of your
Android phone to check if this function is
supported and how it can be enabled.
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis