Philips PicoPix PPX5110 Bedienungsanleitung Seite 19

Problems
When I view videos, the sound or the picture is
sometimes distorted or the sound is not
synchronous with the picture.
What is supported by the micro USB port?
USB projection does not work.
Can I connect a power bank to the projector?
The temperature of the projector's surface is
warm.
What to do if the projector does not work when
connecting to a notebook PC?
18
Solutions
• The available Wi-Fi bandwidth is not enough
to send the video flawless from the
smartphone to the projector. This can
happen if one or more Wi-Fi networks
operate in the same frequency range nearby.
Also certain IoT devices (e.g. ZigBee enabled
devices) operate in this frequency range.
• Your smartphone is not fast enough to
compress the screen data and send it
simultaneously over Wi-Fi.
• Your smartphone may maintain parallel
connections to your home network and the
projector. This will reduce the available
bandwidth. Disabling temporarily the
connection to your home network may help.
• The micro USB port is for charging only.
• You can either use the included charging
cable or an external power bank.
• The minimum requirement to ensure proper
operation is 3 A at 5 V.
• Do not operate the projector with less than
this minimum requirement.
• Make sure you are using iOS smartphone. It
does not function with Android.
• Make sure you have selected iOS mode.
• Make sure "Hotspot" function of iPhone is
switched to "On".
• The power bank has to be connected to the
micro USB port of the projector.
• The minimum requirement to ensure proper
operation is 3 A at 5 V.
• Do not operate the projector with less than
this minimum requirement.
• For this projector it is normal to generate
moderate heat during operation.
• Check that the HDMI cable is plugged
correctly.
• Make sure that the notebook PC has been
switched to projector display.
Philips · PPX5110