Noise/Vibration Information; Technical Data; Angle Grinder - Bosch GWS Professional 22-180 H Originalbetriebsanleitung

A)
(15) Hand guard
A)
(16) Spacer discs
A)
(17) Rubber sanding pad
A)
(18) Abrasive disc
A)
(19) Round nut
A)
(20) Cup brush
(21) Extraction guard for cutting with a guide block
A)
(22) Diamond cutting disc
(23) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:

Technical Data

Angle grinder

Article number
Rated power input
Power output
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding spindle
Restart protection
Starting current limitation
Weight according to EPTA-Procedure 01:2014
– with additional low-vibration auxili-
ary handle
– with standard auxiliary handle
Protection class
Angle grinder
Article number
Rated power input
Power output
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Bosch Power Tools
Surface grinding (roughing):
a =7,5 m/s
h
Grinding with abrasive disc:
a =4,5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
A)
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
GWS 22-180 H GWS 22-180 JH
3 601 H81 L.. 3 601 H81 M..
W 2200
W 1500
-1
min 8500
mm 180
M 14
mm 25
–
–
kg 5.1
kg 5.0
/ II
GWS 24-180 GWS 24-230
JH
3 601 H83 3 601 H84
M..
W 2400
W 1600
-1
min 8500
mm 180
M 14
2 2
, K=1,5 m/s ,
2 2
, K=1.5 m/s .
GWS 22-230 H GWS 22-230 JH
3 601 H82 L..
2200 2200
1500 1500
8500 6500
180 230
M 14 M 14
25 25
● –
● –
5.1 5.3
5.0 5.2
/ II / II
GWS 24-230 GWS 26-180
H JH JH
3 601 H84 3 601 H55
L.. M.. M..
2400 2400 2600
1600 1600 1700
6500 6500 8500
230 230 180
M 14 M 14 M 14
1 609 92A 433 | (26.11.2018)
English | 19
3 601 H82 M..
2200
1500
6500
230
M 14
25
●
●
5.3
5.2
/ II
GWS 26-230
JH
3 601 H56
M..
2600
1700
6500
230
M 14