Projection Of Consumption Data For Different Periods; How To Set The Electricity Price And The Co; Value On Your Sem 16+ / Sem 16+ Usb - NZR SEM16+ Kurzanleitung

PROJECTION OF CONSUMPTION DATA FOR DIFFERENT PERIODS

The displayed value after a complete measurment periode can easily be projected to longer periode.
Conversion example:
Measurement periode 1 day
Monthly energy consumption [kWh] = energy consumption per day * 30
Annual energy consumption [kWh] = energy consumption per day * 365
Monthly energy costs (e.g. €) = energy costs per day * 30
Annual energy costs (e.g. €) = energy costs per day * 365
Measurement periode 7 days
Monthly energy consumption [kWh] = energy costs perweek * 4
Annual energy consumption [kWh] = energy consumption per week * 52
Monthly energy costs (e.g. €) = energy costs per week * 4
Annual energy costs (e.g. €) = energy costs per week * 52
Measurement periode 30 days
Annual energy consumption [kWh] = energy costs per month * 12
Annual energy costs (e.g. €) = energy costs per month * 12
Individual Measurement periode or measuring in progress
Daily energy consumption [kWh] = value : time [hours] * 24 [hours]
Monthly energy consumption [kWh] = value : time [hours] * 720 [hours]
Annual energy consumption [kWh] = value : time [hours] * 8760 [hours]
Daily energy costs (e.g. €) = value value : time [hours] * 24 [hours]
Monthly energy costs (e.g. €) = value : time [hours] * 720 [hours]
Annual energy costs (e.g. €) = Messwert : time [hours] * 8760 [hours]

HOW TO SET THE ELECTRICITY PRICE AND THE CO

SEM 16+ / SEM 16+ USB
The electricity price is set at the factory to 0.20 costs per kWh and does not refer to a
specific currency. To set the rate to the electricity price of your power supply company, you
can change the default value in the SEM16+ as follows:
1. Press the START/STOP and SET buttons simultaneously until "0.240 costs / kWh" appears
in the display.
2. Press the START/STOP button one or more times to increase the value of the digit to the
far right (3rd decimal place). Press SET to jump one digit to the left (2nd decimal place).
Now you can increase the value of this digit by pressing the START/STOP button one or
more times. Proceed in the same manner for the remaining digits.
3. When the desired amount is shown in the display, again press the SET and FUNCTION
buttons simultaneously. This value is now used by the SEM 16+ / SEM 16+ USB for
calculating your energy costs.
NZR – Ihr Partner für Energiemessung
VALUE ON YOUR
2
19