Description Of Device; Instructions For Safety And Use - NZR SEM16+ Kurzanleitung

DESCRIPTION OF DEVICE

The SEM 16+ / SEM 16+ USB is a measuring device that can be used to calculate the cost
of electricity required for single electrical appliances. When the appliance to be checked is
plugged into the device, the SEM 16+ / SEM 16+ USB automatically starts a 24-hour measu-
rement. After completion of the measurement, the power consumption and the energy costs
for the measuring period are displayed. The measuring period can be set to 1, 7 or 30 days
and can also be started and stopped manually. The price per kWh can be entered to 3 decimal
places. During and after the measurement, the following values can be retrieved: power
output, costs per year, energy consumption, costs and equivalent CO2 consumption in the
measuring period, voltage, supply frequency, current, reactive power, apparent power, phase
angle, power factor, minimum and maximum power.
All measured values are also retained in case of power supply permanently stored and can be
retrieved at restoration of the mains supply.
SEM 16+ only
Award of the enviromental label RAL-UZ 142 – Der Blaue Engel.
SEM 16+ USB only
The characteristic curves of active and reactive power of current and voltage during the
measuring period can be displayed with the included PC software.

INSTRUCTIONS FOR SAFETY AND USE

During storage, transport and operation the standby energy monitor must be protected from
moisture, dirt and damage. The connected load must never exceed 3680W (16A). If there is
any indication that safe operation is no longer possible, then the device must be shut down at
once. If damaged, the device cannot be repaired by the user. Inspect the product for damage
at regular intervals.
Operation of the SEM 16+ / SEM 16+ USB is permitted only indoors and in a dry environment.
The recommended operating temperature is between 0 and +45°C. Higher temperatures,
especially during measuring of appliances with a high power draw, can result in overheating,
excessive warming of the housing surface or complete destruction of the SEM 16+ / SEM 16+
USB. Prior to cleaning or maintenance, the device must always first be disconnected from the
power supply. These devices are not intended for use by persons (including children) with
reduced physical, sensory or mental abilities or lack of experience and/or knowledge, unless
they are supervised by a person which is responsible for their safety or received an instruction
in how to use the device.
Children should be supervised to ensure that they do not play with the device.We shall
assume no liability for material damages or personal injury resulting from improper handling
or failure to comply with the operating manual or the safety instructions. In such cases, all
warranty claims shall be voided.
The SEM 16+ / SEM 16+ USB was designed to calculate the energy consumption and the
energy costs of electric loads of single appliances. Despite the high accuracy of the device, it is
not suitable for the official billing of measured energy costs between the power company and
the user.
NZR – Ihr Partner für Energiemessung
14