involight IP PAR1818 Bedienungsanleitung Seite 19

Mode
DMX
DMX Mode
Color mixing
Automatic program
ID-Address
Setting
Menu
18
Description
Select DMX channel mode and set
DMX start address
.
Selection of DMX operating modes
Red Intensity 0% - 100%
Green Intensity 0% - 100%
Blue Intensity 0% - 100%
White Intensity 0% - 100%
Amber Intensity 0% - 100%
UV Intensity 0-100%
Color change in sound mode
Color change in fading mode. Speed
adjustable
Color change in jump mode.
Speed adjustable
Farbwechsel im Puls-Modus.
Geschwindigkeit einstellbar
Defining the ID addresses for the set
DMX address. Each DMX address can
be assigned up to 66 ID addresses.
This is a grouping of devices possible
.
This will reset to the default values.
The password is required. Press [UP],
[DOWN], [UP],
[DOWN] and then
[ENTER]
The changes of dimmer and RGBWA
are linear
Speed modes for the
nonlinear dimmer; "DIM1" is the
fastest, "DIM4" the slowest
Speed modes for the
This enables the application of ID
nonlinear dimmer; "DIM1" is the
addressing via the DMX controller to
fastest, "DIM4" the slowest
be enabled ("On") or disabled ("Off")
This enables the application of ID
addressing via the DMX controller to
be enabled ("On") or disabled ("Off")