Operating Time; Specification - Optimum RK-0650 Bedienanleitung

to 350g, pour appropriate cool boiled water, perform assembly
according to "assembling for use", turn on for mixing
Grinding
1. G rinding cup is applicable to dried
food to be ground into powder.
During using, every time put 150g
into the grinding cup, cover with
the grinding cutter seat, fasten tight
clockwise; mount them on the main
machine according to the position
shown in the diagram, fasten tight
clockwise, press tight the grinding cup with your hand, turn
on the button switch for grinding.
2. W hen grinding sesame, walnut and other oily food, adding a
spoon of granulated sugar into the grinding cup for grinding
together
Note: In case of idling during grinding, i.e., when the cutter
does not contact food, immediately stop, cut off power supply.
Mix the food more softly, then turn on for grinding again.

Operating time

This machine is designed with button switches of O grading, .
I grading, II grading and inching (O for stop, I for weak grading,
II for strong grading, and for inching).
For mincing, cutting up and grinding, strong grading, for
operating time, take the principle of running for 10s and
stopping for 5s, after using for 1min, stop for 1min, then use
again.
For mixing vegetable, fruit, soy milk, select inching or strong
grading, for mixing egg, select weak grading.
For juicing, select strong grading, for operating time, after
operating for 1min, stop for 1min, then use again. After the
above operation is performed for three times, stop for 15 min,
do not operate until the motor is cooled, in this way, service life
of this machine will be prolonged, the machine will serve you
more efficiently.
Attentions
1. T his machine is unavailble for the weakness, unresponsive
or psychopathic perosn(including children), unless
under the direction or help from the person who have the
responsibility for security. Children should be overseen, so
it can be testified that they are not playing with it.
2. B efore using, put this machine on a stable and even table
board, operate according to the above methods.
3. B efore juicing, first confirm juicing net and rotor clutched
in position, and no hard contact between juicing net cutter
and transparent cover. Put the transparent cover on, fasten
tight the handle, then turn on the machine.
4. B efore being used, the motor works in running-in phase,
there may be slight peculiar smell and spark, this is
normal, after the motor works for some period, the above
phenomenon will disappear.
5. D uring juicing, make sure there is not too full juice and
residue in the middle seat and residue cup, if too full, please
cut off power supply, clean up, then use again.
6. D uring using, do not open the cup cover. In case power
supply is on, do not put hand or any ware into the mixing
cup or feed port, otherwise, harmful accident may occur or
this machine may be damaged.
7. I n order to prolong service life of this machine, over-
temperature protective device is mounted in the motor. If
the motor works for a long time or overloaded, when over
warning temperature, power supply will automatically cut
off. After the motor stops, pull out plug of power supply,
wait for the motor to cool (about for 30 min), use again.
8. A ll fittings are strictly prohibited from disinfecting in high
temperature disinfection cabinet or steaming and boiling for
disinfection.
9. D uring operating, please do not leave, never let children
operate this machine.
10. W hen this machine works in mixing, mincing or grinding
conditions, no-loaded or over loaded work is strictly
prohibited.
11. A fter operation, do not pour the food out until pull out the
plug of power supply.
12. C utters are very sharp, in order to avoid danger, when
cleaning a cutter, please put the cutter under water tap for
washing, do not wash it with hand.
13. T his machine must not be used for others beyond regulated
purposes.
14. I n case of damaged power supply cord, in order to avoid
danger, replacement must be performed by the manufacturer
or its service department or similar professional persons. In
case of fault, do not disassemble the machine by yourself,
please contact our maintenance department or our after
service department.
Maintenance and cleaning
1. T his machine shall be often used, so as to keep the motor
dry and clean.
2. I f not using for a long time, please store this machine at a dry
and well-ventilated place so as to prevent the motor from
being damped and going moldy.
3. N o washing the main machine. When cleaning, only wipe
with wet cloth. Other components may be washed directly
with water, such as pushing bar, cover, middle seat, residue
cup, juice nozzle cover.
4. E very month, remove the cutter rest of mixing cup, mincing
cup and grinding cup, drop a little edible oil into the cutter
shaft and bearing in order to ensure lubrication.
5. F or cleaning the mixing cup, fill some warm water and ware
detergent, mount on the main machine, put the cover on,
press the switch to mix for 30s, then wash clean with water.

SPECIFICATION:

Power supply: 220-240V~/50-60Hz
Power consumption: 400W
Level of noise: 90dB
11