Optimum RK-0650 Bedienanleitung Seite 10

Please carefully read the instructions before using.
Diagram of name and position of main components
1. Pushing bar
2. Transparent cover
3. Juicing net
4. Middle ring
5. Handle
6. Residue barrel
7.. Rotor
8. Main machine
9. Top cover
10. Mixing cup cover
11. Mixing cup
12. Sealing ring
13. Mixing cutter seat
14. Grinding cup
15. Grinding cutter seat
* O ption function: Ice Blender RK-0651, Coffee Grinder RK-0652.
Performances
1. T his machine serves the functions of juicing, grinding,
mixing, water-ice making and others, enriching your life,
selected at will.
2. D esign is fine, simple, and beautiful, with combined
structure, easy to operate and clean.
3. H igh speed electric motor with overheating protection is
adopted, high efficiency, time saving, energy saving, high
service life of the motor.
4. S afety lock unit for switching is specially designed, in order
to make sure safety and reliability in use.
Attention before using
1. T his machine is set with safety unit, when the handle does
not fasten the cover or the cutter seat is not fastened, the
motor cannot turn, so as to ensure safety for the user.
2. W hen disassembling or assembling the juicer, press the
upper of feed port of the cover with your hand, then force the
handle to slide in or out of cover slot.
3. W hen disassembling juicing net, first remove the cover and
residue barrel, then turn the middle ring up to 30 degrees
by holding juicing nozzle with your hand, and take up, the
juicing net will automatically leave the rotor.
4. I n order to avoid damage, before using, first check power
supply for compliance with rated voltage.
5. C lean all parts able to disassemble (refer to the section of
"maintenance and cleaning").
6. W hen assembling, please carefully read the diagram of
"name and position of main components".
7. P lease carefully read the "attentions" before using.
10
INSTRUCTION MANUAL
Juicer/Blender RK-0650
Juicing
1. B efore using, please confirm the
button switch of the main machine
in stop state, in this way, in case
assembly is not completed, starting
the main machine can be avoided,
so unnecessary damage for persons
or property avoided.
2. B efore juicing, first confirm juicing
net and rotor clutched in position, and no hard contact
between juicing net cutter and transparent cover. Put the
transparent cover on, put the handle into the cover slot,
then turn on the machine.
3. F or using, assemble according to the diagram of "name
and position of main components". Turn on power supply,
press switch to let the machine run no-load for 5 sec. Put
prepared vegetable or fruit into feed port of the juicer,
press with the pushing bar, evenly, hard and slowly, juice
of the vegetable or fruit can be found, original, fresh, good
for health.
4. F or the juicer with large diameter, entire apple or pear can
be put in for juicing, no cutting apart needed, easy and
quick.
. . N ote: when pressing food with the pushing bar, force shall
be even or indirect, pressing force shall not be more than
1 kg, no too sudden force, otherwise, juicing effect will be
reduced.
Mixing
1. F irst check the position switch
in stop state (the switch shall be
in stop position).
2. P ut sealing ring into cutter
seat slot, screw and fasten
mixing cup into cutter seat
(clockwise
and counterclockwise
loosening), put the mixing cup
cover and the feed cover on.
3. C lockwise screw the cutter seat into the main machine with
your hand (counterclockwise for loosening), no holding the
cup with your hand for disassembling, otherwise, the cup
will leave the cutter seat make food in the cup leak out.
Egg mixing
Put egg without eggshell into the mixing cup, pour appropriate
cool boiled water, add some flour. Put and fasten the cover,
press the button of weak grading for 1 min.
Vegetable or fruit mixing
For vegetable or fruit to be mixed, after peeling or shelling,
and pitting, cut it into blocks or sections, every time put 250g
for fastening,
for
UK