Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of The Device - EuroLite LED FE-41 Flower Effect Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal
which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or
local authorities for more information.

DESCRIPTION OF THE DEVICE

Features
Handy Flower Effect
• Powerful Flower Effect in small design
• With 41x 5mm RGB LEDs
• Perfect for use in small discos, party rooms even in children's rooms
• Black plastic housing
• Power switch on the rear
• Operation via supplied power unit
INSTALLATION
Attachment
Before attaching the device, make sure that the installation area can hold a minimum point load of 10 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water-level.
The device must be installed out of the reach of people.
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
The device must always be installed via all fixation holes. Use only appropriate screws and make sure that
the screws are properly connected with the ground.
Permanent installation is recommended!
10/12
00100258.DOCX, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis