Operating Instructions; Safety; Equipment Description; Standard Delivery - STIEBEL ELTRON SOM 6 PLUS Bedienung Und Installation

1. Operating instructions

Content
1. Operating instructions ___________ 17
1.1 Safety __________________________________17
1.2 Equipment description _____________17
1.3 Standard delivery ___________________17
1.4 Specification _________________________17
1.5 System overview ____________________17
2. Installation instructions __________ 18
2.1 Instructions and regulations ______18
2.2 Installation ___________________________18
2.3 Power connection ___________________18
2.4 Terminal allocation _________________19
2.5 Commissioning ______________________21
2.6 Control parameters and display
channels ______________________________22
2.7 Troubleshooting tips ________________28

1.1 Safety

Where children or persons with li-
mited physical, sensory or mental
capabilities are to be allowed to control this
appliance, ensure that this will only happen
under supervision or after appropriate in-
structions by a person responsible for their
safety. Children must be supervised to ensu-
re that they never play with the appliance.

1.2 Equipment description

The solar control unit SOM 6 plus is used with
standard solar heating systems.
An innovative, multi-functional combi display
makes for easy operation.
With this, the standard system is stored in the
controller and is shown in the display as a
system diagram.
Information about functions and the operating
status of the device is displayed in easy-to-
understand pictograms.
The central user interface is the three-
pushbutton panel under the combi LCD.
The controller offers 4 sensor inputs, a solar
hours run meter, manual operating mode and
the following special functions:
- Maximum cylinder temperature
- Collector cooling function
- Tube collector function
- Collector emergency stop
- Drainback
18
for users and contractors

1.3 Standard delivery

1 x SOM 6 plus
1 x accessories bag
1 x spare fuse 4A (slow)
2 x screw and rawl plug
4 x strain relief and screws
2 x PT1000
1 x heat conducting paste

1.4 Specification

Height
Width
Depth
Weight
IP-Rating
Rated voltage
Phases
Frequency
Total switching current
Power consumption
Relay capacity
Number of inputs
Number of switched outputs
Casing material
Measuring range
Ambient temperature

1.5 System overview

mm
mm
mm
kg
V
Hz
A
W
A
°C
°C
ZHB ù
230141
172
110
46
0,36
IP20
100...240
1/N/PE
50...60
4
<1
1 (1)
4
1
Plastic, PC-ABS/PMMA
-40...260
0...40