Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE
Daily visual inspection of the nozzle by trained personnel should be carried out to ensure proper function.
The nozzle shall be clean and not show any signs of damage ( e.g. broken components, sharp edges,
blocked lever, swivel non-rotating ). Especially check the nozzle spout for damages. In case the nozzle
spout is polluted by crystallized AdBlue
The nozzle condition shall be thoroughly checked during the annual pump maintenance by competent
personnel. Applicable laws, regulations and Codes of Practice have to be followed. Especially check
the automatic shut-off and the tightness of the locking mechanism of the spout ( see 'Function Testing' ).
Nozzles in unfit condition for use must be replaced immediately.
GUARANTEE / WARRANTY
We guarantee against defective materials and manufacturing up to 18 months from date of supply. If
delivery date cannot be established, the date code on the nozzle ( e. g. • 2016 means 1st quarter 2016 )
prevails. Excluded are nozzles and parts subject to wear and tear, abuse and to contamination.
Furthermore excluded are damages by misuse, indirect damages and costs, travelling related to
exchange and repair work. We refuse any liability for consequential loss or damage resulting from the
use of our nozzle.
16
, soak it in a bucket of warm water to dissolve the crystals.
®
TÜV approval
This certificate can be
downloaded from :
http://www.elaflex.de/dokumente/
download/Certificate/
Zert_ZVAAdBlueLV_TUEV.pdf
Werbung
Inhaltsverzeichnis
Fehlerbehebung
