Jøtul FS 73 Montageanleitung Seite 41

Preparing to install the burnchamber
Fig. 9
B
1. Lift up the steel sides (A) and secure them in place using the
screws provided. Screw the fireproof board in place with 2
screws. Position and secure the side panels (B) using the 4
bolts provided. NB: Check that it is level.
Fig. 10-a
2. Fit the top plate (A) of the log store into place. It might be
rather a tight fit. To make installation easier, put a screw into
the plate and use this like a handle to pull the plate forward.
The top plate of the log store can be mounted/dismounted
through the opening of the log store.
A
B
A
Fig. 10-b
1. Pull the top plate of the log store into place
Fig. 11
A
2. Fit the bottom plate (A) to the burn chamber.
ENGLISH
41