Storage When Not In Use - UNITED OFFICE UAV380 A1 Bedienungs- Und Sicherheitshinweise

˜ Shredding paper
Set the switch 1 to position
"AUTO ON CD".
Insert paper in portrait format into the
document feed 8 .
Shredding starts automatically and ends
when all the paper is shredded.
NOTES:
Shred maximum 10 sheets (80 g/m
of paper at a time.
Remove all paper clips and staples larger
than 25 mm before feeding the paper to
avoid damage to the appliance.
˜ Shredding media /
credit card
Set the switch 1 to position
"AUTO ON CD".
Insert the single medium or credit card into
the media / credit card feed 4 .
Shredding starts automatically and
ends when the medium or credit card is
shredded.
NOTES:
Shred maximum 1 medium (e.g. CD) or
credit card at a time.
Insert the credit card into middle part of
the credit card feed 4 . Otherwise, the
shredding process might not start.
When destroying media (e.g. CD), always
hold it by its edge when feeding it into the
appliance.
˜ Clearing a material blockage
Set the switch 1 to position "REVERSE".
The appliance now goes into reverse mode
and the material that is being shredded is
ejected.
Set the switch 1 to position "OFF" as soon
as the jammed material has been ejected.
˜ Switching the appliance off
Set the switch 1 to position "OFF".
14 GB/IE
˜ Emptying buckets
Switch the appliance off and disconnect the
power plug from socket-outlet.
Remove the blade assembly from the bucket
for paper shreds 6 .
Remove the bucket for media / credit card
shreds from the main bucket by pulling it up
from its holder. Reinstall in reverse order.
)
2
Empty both buckets and dispose shredded
materials in an environmentally responsible
manner.
˜ Overheating protection
This appliance is fitted with an overheating
protection. If the motor overheats due to
overloading, the appliance switches off
automatically and the overheat indicator 3
lights up. If this occurs, proceed as follows:
Set the switch 1 to position "OFF".
Remove the power plug from the
socket-outlet to avoid unintended starting of
the appliance.
Allow the appliance to cool for at least
40 minutes.
Resume the operation as described before.
˜ Storage when not in use
Store the appliance in a dry indoor location
protected from direct sunlight, preferably in its
original packaging.