Operating Features - urmet 1092/251 Schnellanleitung

ENGLISH
INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Install the camera on the bracket and fasten it.
3 Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
4 Connect the video output to the utility.
5 Power the camera.
6 Adjust the lens to frame the required images.
•
Remove the camera top.
•
Loosen the protective dome.
•
Turn towards WIDE "W" to move the subject away (the frame and angle become consequently
wider).
•
Turn towards TELE "T" to move the subject closer (the frame and angle become consequently
narrower).
•
Turn towards NEAR "N" to adjust focus of nearby subjects.
•
Turn towards FAR "∞" to adjust focus of faraway subjects.
Focus adjustment ring
VARIFOCAL adjustment ring

OPERATING FEATURES

MENU setting
4
Blind spot covered
by LEDs
Focus adjustment ring lock
pin
VARIFOCAL adjustment ring
lock pin
UP
LEFT SET
DOWN
RIGHT
DS1092-199