Leckey Mygo Bedienungsanleitung Seite 60

11.1 Transferring your
child into and out of the
seat
Before transferring the child into the seat
carry out the daily product inspection as
outlined in section 13 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards to
maximise product stability. Make sure the
safety buckle on the chest harness is
released and is out of the way to facilitate
transfer.
If the seat has flip-away thoracic laterals, first
move these out of the way using knob A.
Unclip the pelvic harness or Pelvic Cradle
in the middle, undo the side velcro of the
Pelvic Cradle and allow the harness to open
out to facilitate transfer. Lastly if sandals are
fitted open the straps. You are now ready to
transfer or hoist the child into the seat.
The pelvic harness and Pelvic Cradle are
fastened using the middle buckle, and side
velcro (in the case of the Pelvic Cradle).
Always secure the pelvic harness or
Pelvic Cradle first before fastening
other buckles or harnesses. Adjust the
harness so the child cannot slide or
creep forward in the seat.
A