Leckey Mygo Bedienungsanleitung Seite 42

10.1 Pelvic Harness
To adjust the depth of the pelvic harness,
move the snap fastener to either position
(B or C). Adjust the support straps to the
required length. Ensure the buckle connects
securely in the middle (D). If using the seat
outdoors and your child is wearing
a coat, position the pelvic harness under
the coat.
Always attach the pelvic strap first
before making any other adjustments.
10.2 Pelvic Cradle
The Pelvic Cradle should be flat and open
when the user is placed into the Kit Seating
System. All four side and back buckles should
be already attached to the seat. First fasten
the buckle (A) at the front of the Pelvic Cradle.
Then fasten the Velcro (B) at the sides to fit
the Pelvic Cradle to the user. Then adjust the
front and rear straps (C) and (D) to secure to
position the user's pelvis.
C B
D
A