auna MVD-400 CP Bedienungsanleitung Seite 23

Precaution
• The said product is powered by means of a 12 V AC accumulator which is
grounded via the negative electrode.
• Please connect as per the wiring diagram so as to avoid any device
damage.
• Before connection, strip off the insulation layer long as 5mm on both
ends of the wires.
• Do not power on until connection is finished.
• Insulate any exposed live part in order to prevent short-circuit with the
automobile chassis.
• Bundle all the wires and cables so as to prevent any terminals making
contact with any metal object.
Note: As for any automobile equipped with computer or satellite
navigation system, the information stored could be totally erased when
the battery terminal is pulled off.
Attention when connecting speakers
• Do not use any grounded speakers.
• The power of the speaker in use must exceed 40 W as it is required to
accept maximum output power of the amplifier.
• The speaker has resistance ranging between 4~8 Ohm. Any resistance
not covered by such range could affect output power and even damage
the speaker or the said product.
• The speaker wires should be approximately 30 mm away from the
antenna and antenna extension cable.
• Please follow the diagrams to connect correctly so as to safeguard
either the speaker or the said product.
EN
23