Troubleshooting - JVC KW-DB60AT Bedienungsanleitung

Troubleshooting

Troubleshooting
Symptom
o General
No sound, sound interrupted or
static noise.
"MISWIRING CHK WIRING THEN
RESET UNIT"/"WARNING CHK
WIRING THEN RESET UNIT"
appears on the display and no
operations can be done.
The unit does not work at all.
Source cannot be selected.
The correct characters are not
displayed (e.g. album name).
o FM/AM
SSM automatic presetting does
not work.
o DAB
"NO SIGNAL" appears on the
display.
"CHK ANTENNA" flashes on the
display.
o CD/USB/iPod/iPhone
"PLEASE" and "EJECT" appear
alternately on the display.
"IN DISC" appears on the display.
"READING" keeps flashing on the
display.
Tracks/folders are not played
back in the order you have
intended.
The elapsed playing time is not
correct.
"NOT SUPPORT" appears on the
display and track skips.
"CANNOT PLAY" flashes on
0
the display.
The unit cannot detect the
0
connected device.
The iPod/iPhone does not turn
on or does not work.
22 | ENGLISH
Check the cords, aerial and cable connections.
0
Check the condition of the disc, connected device and
0
recorded tracks.
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (A page 3)
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
Reset the unit. (A page 3)
Check the <SRC SELECT> setting. (A page 19)
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
Store stations manually.
Move to an area with stronger signals.
Check the cord and connections.
Press [M], then insert the disc correctly.
The disc cannot be ejected properly. Make sure nothing is
blocking the loading slot.
A longer readout time is required. Do not use too many
0
hierarchical levels and folders.
Reload the disc or reattach the USB device.
0
The playback order is determined by the file name (USB) or the
order in which files were recorded (disc).
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
Check whether the track is a playable file format.
Check whether the connected device is compatible with this
0
unit. (USB: A page 23) (iPod/iPhone: A page 21)
Ensure that the device contains files in the supported
0
formats. (A page 20)
Reattach the device.
0
Check the connection between this unit and iPod/iPhone.
0
Detach and reset the iPod/iPhone using hard reset. For
0
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether <IPOD SWITCH> setting is appropriate.
0
(A page 13)
Remedy/Cause