Installation; Installation Example: In False Ceilings; Motor-Impeller-Unit - Helios SlimVent SVR 125 B Montage- Und Betriebsvorschrift

Installation and Operating Instructions
CHAPTER 3

INSTALLATION

WARNING
NOTE
Slim centrifugal fan box – SlimVent SV..
3.0 Installation
Leave the fan in its box until installation. Check that the fan is in good condition and has not been damaged in transit.
Isolate the unit fully from the mains electric supply.
All servicing only in disconnected state !
3.1

Installation example: in false ceilings

With insertion directly in-line e.g. horizontal in false ceilings (pic.1), the device with the short installation depth fits
everywhere. Installation in every position possible – horizontal, vertical and at an angle.
fig.1
Installation in a false ceilings.
Runs directly in the pipe routing.
3.2 Motor-impeller-unit, swing-out
Particularly service friendly (cleaning and inspection) through swing-out (see fig. 2/3) motor and impeller unit without
disassembly of fan. Space for swing-out facility must be considered !
fig.2 fig.3
4