Display Modes; Manual Time Setting - Auriol 2-LD3824-6 Bedienungs- Und Sicherheitshinweise

Features
• Radio controlled time
• Digital date, time and seconds display
• Display of the day of the week in English or German
• Time zone selection (3 time zones)
• Radio reception indicator

Display modes

Press A to select one of the display modes of the wrist watch:
date day of
the week
Manually starting time signal reception
Radio time signal reception can be started manually.
Press A to select the date display mode.
Press and hold A for 3 seconds. The reception is started and the radio reception control symbol
appear blinking on the display. Radio reception takes between 3 and 9 minutes to complete and can be
interrupted by pressing any button.
The radio reception control symbol will appear continuously on the display while the reception is
successful.
Turning bezel
A
Immovable crown. No function
B
time seconds
zone
- 3 -

Changing the time zone
Press A to select time zone display mode.
Press and hold B for 3 seconds. Press A to select the correct time zone:
Uk = Greenwich Mean Time (UTC), GE = Central European Time (UTC+1), GR = Eastern Europe (UTC+2).
Confirm your selection by pressing B. The hands will automatically move to the appropriate time.

Manual time setting

Only use the manual time setting if radio signal reception is not possible. Should your watch display the
incorrect time, please proceed as described in the chapter "Troubleshooting" at the end of this manual.
Press A to select the date display mode. Press and hold B for 3 seconds.
The hours will blink on the display. Set the hours by pressing A and confirm your setting by pressing B.
The minutes will blink on the display. Set the minutes by pressing A and confirm your setting by pressing B.
The hands will automatically move to the appropriate time.
Day of the week language selection
Press A to select the day of the week display mode. Press and hold B for three seconds.
The set language will blink on the display. Select your preferred language by pressing A: En = English, DE =
German.
Confirm your selection by pressing B.
Calibration
Replacing the battery, strong magnetic fields or strong vibrations may cause the hands to lose synchronisation
with the internal time. In this case the hands must be recalibrated. Ensure that the watch is displaying the date.
If necessary, repeatedly press A until the date appears.
Press and hold A and B for 5 seconds, until 'HP' appears blinking on the display.
Calibrating the minute hand
To set the minute hand exactly to the 12 o'clock (60 minute) position:
Press and hold A. The minute hand will move forward and will continue to move until it is
•
stopped by again pressing A. Stop the minute hand shortly before it reaches the 12 o'clock
position.
Repeatedly press A briefly- the minute hand will move by one sixth of a minute each time A is
•
pressed. Move the minute hand exactly to the 12 o'clock position.
Now press B to continue to the calibration of the hour hand.
Calibrating the hour hand
A digit will appear blinking on the display. This digit must match the current position of the hour hand. Do not
set the actual current time! For example: If the hour hand is at the 5 o'clock position, the display must also
will
show "5".
Repeatedly press A to adjust the digit in the display to match the position of the hour hand.
•
Briefly press B to complete the setting process.
The watch will now start radio reception.
- 4 -
