Troubleshooting Guide - Team Kalorik TKG VC 1021 Gebrauchsanleitung

Fax +32 2 359 95 50


TROUBLESHOOTING GUIDE

PROBLEM
Cleaner won't run.
Vacuum will not pick up, or
suction power is reduced.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it free of charge to a municipal collection point
performing waste recovery by means of reuse, recycling or use for other applications in
accordance with the directive.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
POSSIBLE REASON
1. Switch button is not on.
2. Power cord not firmly
plugged into outlet.
3. Thermal protector
activated.
4. The water in the barrel is
full.
1. Partition needs cleaning.
2. The filter is blocked.
3. Floor brush clogged.
13
Assembly page 13/22
special instruction from
POSSIBLE SOLUTION
1. Turn switch button on.
2. Check that plug is firmly in
electrical outlet.
3. Allow cleaner to cool.
4. Pour out the water.
1. Clean the partition if
necessary.
2. Clean the filter if
necessary.
3. Check floor brush to clean.
TKG VC 1021 - 160216
Team
on the