Safety Instructions; Application In Accordance With Regulations; Maintenance - Reloop SPIN Bedienungsanleitung

INDEX

Safety Instructions .............................................8

Application in accordance with regulations .8

Maintenance .........................................................8

I. Designation ...................................................9
II. Setup & Connections ..................................10
III. Operation .......................................................10
1. Play/Stop Button .....................................10
2. Volume Dial ...............................................10
3. Bluetooth Pairing Button ......................10
4. Aux In Volume Dial ..................................10
5. USB Rec. Button ......................................10
6. Tone Dial ....................................................10
CAUTION! For your own safety, please read this operation manual carefully before initial opera-tion! All persons involved in the installation,
setting-up, operation, maintenance and service of this device must be appropriately qualified and observe this operation manual in detail. This
prod-uct complies with the requirements of the applicable European and national regulations. Conformi-ty has been proven. The respective
statements and documents are deposited at the manufacturer.
Please remove the Reloop SPIN from its packaging. Check before initial operation to make sure that the device has not been visibly damaged
during transport. If you detect any damage to the power cable or casing, do not operate the device. Contact your specialised dealer.
SAFETY INSTRUCTIONS
CAUTION! Please exercise particular caution when handling power voltage. This volt-age rating may lead to a critical electrical shock! Any
damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage
to property or for personal injury caused by improper handling or non-observance of the safety instructions.
- This device left the works in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety
instructions and warnings contained in this opera-tion manual.
- F or reasons of safety and certification (CE) the unauthorised conversion and/or modification of the device is prohibited. Please note that in
the event of damage caused by manual modification to this device, any warranty claims are excluded.
- T he inside of the device does not contain any parts which require maintenance, with the excep-tion of wear parts that can be exchanged from
the outside. Qualified staff must carry out mainte-nance, otherwise warranty does not apply!
- E nsure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that the mains
switch is in the „OFF" position when connecting the device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer,
if you have any questions.
- E nsure that when setting up the product, the mains cable is not squashed or damaged by sharp edges.
- P revent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and connections. Never
touch these parts with wet hands!
- C onnect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in accordance with
specifications of the public supply network.
- D isconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the body. Never pull the
mains cord! When not using the turntable for longer periods of time, close the dust guard.
- P osition the device on a horizontal and stable low-flame base.
- A void any concussions or violent impact when installing or operating the device.
- W hen selecting the location of installation, make sure that the device is not exposed to exces-sive heat, humidity, and dust. Be sure that no
cables lie around openly. You will endanger your own safety and that of others!
- D o not rest any containers filled with liquid that could easily spill onto the device or in its imme-diate vicinity. If, however, fluids should access
the inside of the device, immediately disconnect the mains plug. Have the device checked by a qualified service technician before re-use.
Damage caused by fluids inside the device is excluded from warranty.
- D o not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct
exposure to the sun and heat sources such as ra-diators, ovens, etc. (even during transport in a closed vehicle). Always ensure a sufficient
ventila-tion.
- The device must not be operated after being taken from a cold environment into a warm envi-ronment. The condensation caused hereby may
destroy your device. Do not switch on or operate the device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp
cloth. Never use solvents or cleaning fluids with a petroleum base for cleaning.
- W hen relocating, the device should be transported in its original packaging.
- D evices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.
- A t commercial facilities the regulations for the prevention of accidents as stipulated by the asso-ciation of professional associations must be
observed.
- A t schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.
- K eep this operation manual in a safe place for later reference in the event of questions or prob-lems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

- T his equipment is a portable turntable that plays conventional 12" and 7" records. The equip-ment is connected to a mixing console.
- T his product is authorised for connection to AC and is designed exclusively for indoor applica-tion.
- If the device is used for any other purposes than those described in the operation manual, dam-age can be caused to the product, leading
to the exclusion of warranty rights. Moreover, any oth-er application that does not comply with the specified purpose harbours risks such as
short circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the war-ranty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains line or casing, as well as for wear of wear parts such as rotary,
sliding switches and the pick-up.
- If it is to be assumed that a safe operation is no longer feasible, then the device must be dis-connected and secured against accidental use.
Always disconnect the mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible, if the device bears visible defects, the device no longer functions, following
longer storage under unfavourable conditions or after major transport stress.
8
IM_SPiN_en.indd 8
7. Power LED .................................................10
8. Pitch Dial ...................................................10
9. Speed Switch ............................................10
10. Crossfader .................................................10
11. 7'' Single Adaptor....................................10
12. Tone Arm with cartridge .......................10
13. Platter ........................................................10
14. Tone Arm Rest .........................................10
15. Tone Arm Holder .....................................10
16. Kensington Lock Slot .............................10
17. USB Rec. Port ..........................................11
18. Headphones Out ......................................11
19. Master Out (RCA) ....................................11
20. On/Off Button ...........................................11
21. USB PSU Input .........................................11
22. Battery Compartment ...........................11
23. Aux In (3.5 mm Jack) .............................11
24. Speaker ......................................................11
IV. Crossfader .....................................................11
V. Operation/Power Supply ...........................12
VI. Replacing the Cartridge Needle ..............12
VII. Technical Specifications: ...........................12
VIII. Connection Diagram ...................................13
12.02.2019 11:53:06