Fama TI 12 Bedienungsanleitung Seite 27

CHAP. 3. SAFETY INSTRUCTIONS
INTRODUCTION
The lacked standards and safety procedures applications can be danger and damage sources.
The machine means bound in the use for the respect, on behalf of the final user, of:
1. all rules, of insertion in the environment and of people behavior, fixed from the laws and/or applicable
standards; with particular reference to the fixed plant upstream of the supplied machine and for its
connection / functioning;
2. All further instructions and use warnings making part of the technical / graphic documentation annexed to
the same machine.
Except where differently specified, the personnel which performs the installation interventions, connection,
maintenance, reassembly, and reuse, damages or breakdowns, demolition and dismantling must be a
skilled personnel qualified in safety matter and educated on the residual risks, with the competencies, in safety
matter, of the maintenance employees.
ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive 89/654/CEE requirements. In the working area foreign object must not be
present. The employer, in the directive 89/391/CEE respect, concerning the measures realization turned to promote the safety
and workers health improvement during the work, must provide to eliminate or reduce the showed residual risks as foreseen in
the present manual.
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN
PARTS
For any evenience the operator must not try to open or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance and cleaning, and during all further manual operations that
happens introducing the hands or other body parts in the machine dangerous areas, a residual risk remains due
above all to:
Knocks with machine manufacturing parts,
1.
2. Grazing and/or abrasion with machine rough parts,
3. Cut with tools sharpened parts.
Besides, the operator and the maintenance man must be skilled for the intervention connected to the manual
operations with open protections, must be trained on the joined consequent risks and must be authorized from
a responsible person.
PROTECTION DEVICES ON THE MACHINE
The machine protections and safety devices must not be removed.
If they must be removed for extraordinary maintenance requirements some measures will have to be
immediately adopted ready to put in evidence and to reduce at the possible minimum limit the danger.
The putting back in its place of the protection or of the safety device must happen as soon as the reasons, that
have made necessary their temporary removal, are stopped.
The machine transmission parts are completely isolated by means of fixed protections which don't allow the access for none
kinematical chain.
Taking into account of the machine use modality and its use destination, the moving elements aren't isolated from fixed
protections, moving protections or other safety devices.
The grinding group parts result placed at some distances from the access points such for which some dangerous points aren't
reachable.
For all safety functions including the control and check systems parts joined to the safety, some well-tested components and
safety principles have been used.
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
8 18