TFA HiTRAX Bedienungsanleitung Seite 9

To switch between °F and °C
1. Use A or E to switch to the barometer display with temperature.
2. Hold down B until the unit indicator (°F or °C) stops flashi ng to switch temperature between °F and °C.
To set sea level pressure reading
1. Hold down D until "SET CURRENT WEATHER" scrolls on the display, which indicates the weather setting
screen.
* The weather indicators start to flash.
2. Press C, "SET SEA LEVEL PRESSURE" scrolls on the display, which indicates reading setting screen.
* The current sea level pressure reading starts to flash.
3. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed.
4. Press D to exit the setting screen.
* If there is no button operation for 2 -3 minutes at setting screen, the display will return to Barometer mode
automatically.
To set current weather
1. Hold down D until "SET CURRENT WEATHER" scrolls on the display, which indicates t he weather setting
screen.
* The weather indicators start to flash.
2. Use A (+) and B (-) to change the setting as in the following:
A
B
3. Press D to exit the setting screen.
* If there is no button operation for 2 -3 minutes at setting screen, the display will return to Barometer mode
automatically.
A
A A
B B
B
9