Tomahawk SWIFT S-1 Bedienungsanleitung Seite 15

17
18
We recommend the connection to the fuselage with a 6-pin Mulltiplex connector, as
19 described above. Pay attention to the correct assignment of the plug that you have
also selected on the fuselage plug.
Now the servos are brought into their neutral position and the servo arm screwed at
20
90 °.
21
ASSEMBLY THE WINGS
Begin by installing the aileron and flap servos in
the brackets. Attach the servos with the carbon
tabs and wood screws. Pull the servo cables
into the wing and solder them to the servos.
To avoid subsequent rattling of the servo cables
in the wing, it is advisable to provide the cable
with foam pieces.
Make the linkage from the threaded rods, two nuts
and the two clevises. A little screw-proof secures
the rod against twisting.
ENGLISH
15