Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2- Working mode:
a.
Mode 1: AC powered, Output 7v, Adaptor DC7V - 600mA
b.
Mode 2: DC powered, 4 D-size alkaline batteries needed. When power is given only by batteries, after switching on the
feeder, press the "ON/OFF" button on the control panel for 5 seconds to activate screen display.
c.
Mode 3: AC and DC powered, usually powered by AC without consuming the power of batteries and when AC is cut off,
batteries will automatically provide power to keep the feeder working. The screen will be in a sleep mode and has no display,
to activate it, press the "ON/OFF" button for 5 seconds.
Notice: if no actions are made within 76 seconds the screen will be locked (no respond when pressing any button), to unlock it, press
the "ON/OFF" button on the control panel for 5 seconds.
3- Clock setting:
A.
Press "Time setting" button for over 2 seconds until the left number (hour) flickers, press "(+)""(-)" buttons to adjust it. Press
"Time setting" button, the right number (minute) flickers, press "(+)""(-)" buttons to adjust it. Press "time setting" button to return
and save the setting.
4- Timing setting (hourly feeding only):
Press "timing" button, the feeding time flickers, adjust feeding time by pressing "(+)""(-)" buttons. Press "Timing" button again, repeat
the process to set the feeding times of the second to the fifth feeds. Press "Timing" button to return and save the settings. At this time
press "Timing" button again and to check the settings. (Time is set by hour, which means the feeder provides hourly feeding only.
When the time is set at 24:00, this time of feeding will be canceled.)
5- Feeding amount setting:
Press "Food amount" button, use "(+)""(-)" buttons to choose from 1-12 portions (about 25gr
per portion) according to food consumption of your pet.
Notice: an axe with six blades is instaled in factory an it allows foods with diameters within
0.8-1.5 cm. For larger food please replace the axle with the one has 3 blades, which allows
foods with diameters within 1.5-2 cm.
6- Setting times of feeding:
This feeder can serve one to five meals per day. If only three meals are needed, just set the
time of the forth and the fifth meal at 24:00.
9
Werbung
Inhaltsverzeichnis
