Beko HMM7422W Anleitung Seite 8

3 Operation
3.3 Mixing on the stand
WARNING: When attaching the
A
mixer to the housing, make sure that
the whiskers and kneading hooks
are not attached.
1. Start from the rear part of the mixer to place it
into its housing.
- Click will be heard.
2. Press the housing opening button to lift the
housing.
3. Fit the whisker/kneading hook with double
notches to the small accessory housing (5),
and fit the whisker/kneading hook with a
single notch to the large accessory housing
(5).
4. Put the ingredients into the mixing bowl.
5. Press the housing opening button to close the
housing downwards.
- Click will be heard.
6. Operate the appliance (see 3.2)
7. Once mixing/kneading is done, set the speed
controller to "0" and unplug the appliance.
8. Press the housing opening button to lift the
housing.
9. Grab the whiskers or kneading hooks by one
hand and press the accessory detaching
button.
10. Press the mixer detaching button to take out
the mixer.
C
For better results, use it for at least
200 ml mixtures.
8 / EN
Stand Mixer / User Manual