Hama Dashcam 60 Bedienungsanleitung Seite 15

9.3.4 Beep
Activate/deactivate the Beep of your Dashcam.
• Navigate to the Beep menu item and confirm your selection by pressing [OK] (11). A new overview
window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
9.3.5 Language
Select the language for the menu navigation.
• Navigate to the Language menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
9.3.6 Format memory card
Delete all files located on the inserted memory card.
• Navigate to the Format memory card menu item and confirm your selection by pressing
[OK] (11). A new overview window opens.
• Confirm the formatting by pressing [OK] (11).
9.3.7 Factory settings
• Navigate to the Factory settings menu item and confirm your selection by pressing [OK] (11). A
new overview window opens.
• Confirm the reset by pressing [OK] (11).
9.3.8 Version
• Navigate to the Version menu item and confirm your selection by pressing [OK] 11). A new
overview window opens.
• The current camera version is displayed.
10. Retrieving the recorded material
Note
Do not remove the microSD card with the Dashcam switched on. This can result in data loss or cause
damage to the device.
• Switch off the Dashcam as described in 7.2 Switching on/off.
• Remove the camera's microSD card.
13