Setting Operating Modes Gr, Multi; Gr Mode: Shooting With A Different Flash Mode For Each Group - Walimex Pro Operator TTL Funkfernsteuerung

NOTICE
The Walimex pro Mover 400 TTL studio flash and the flashes of the Walimex
pro VC Excellence series, VC Excellence Plus series, VE Excellence series
and Newcomer series include a built-in radio receiver. They are compatible
with the Walimex pro Operator TTL T-S transmitter. Group, channel, and ID
must be the same as on the transmitter. To set the flashes, please refer to
the user instructions.

7.6 Setting operating modes Gr, Multi

Press and hold the [MODE] button for 3 s on the radio transmitter, and switch the
<Gr>/<Multi> modes in sequence (displayed at the top of the screen).
7.7 Gr Mode: Shooting with a different flash mode for each group
In Gr mode, you can set different flash modes for the A/B/C groups. The selec-
table modes are <TTL>/<M 1/x>/<M>/<OFF>.
Select <Gr> mode: Press and hold the [Mode] button for 3 s, and set the radio
transmitter to <Gr>.
Select flash group: Briefly press the [GROUP] button to select the A, B or C
group. The currently selected group is indicated by a triangle.
Set up flash mode for the selected flash group: Briefly press the [MODE]
button; <TTL>, <M 1/x>, <M> and <OFF> are shown in sequence.
37