Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Radio Transmitter; Mounting The Transmitter To The Camera - Walimex Pro Operator TTL Funkfernsteuerung

Vorschau ausblenden Andere Handbücher für Operator TTL:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.2 Using the radio transmitter

Wirelessly triggered studio flash (Walimex pro Mover 400 TTL, VC Excellence
Series, VC Excellence Plus Series, VE Excellence Series, Newcomer Series)
● W hen the camera is off, mount the transmitter Walimex pro Operator TTL T-S
on the hot shoe of the camera, then turn on the camera and transmitter.
● S et the transmitter and flash to the same channel.
● P ress the camera shutter button; the studio flash will be triggered at the same
time as the camera.

6.3 Mounting the transmitter to the camera

Remove protection cap of transmitter´s mounting foot. Slide the transmitter's
mounting foot fully into the camera's hot shoe. Rotate the locking ring clockwise
to firmly attach the transmitter to the camera. Rotate the locking ring anticlock-
wise to detach the transmitter.
34
Fig 1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis