Operating The Device; Switching The Unit On / Off; Lcd Illumination; Saving The Parameters - Walimex Pro Operator TTL Funkfernsteuerung

7. Operating the device

7.1 Switching the unit ON / OFF

Switch [POWER] to the right. The power is now ON and the LCD screen illu-
minates.
NOTICE
If the device is going to be out of service for a long period, please switch off
the power to preserve battery power.

7.2 LCD illumination

The backlight of the LCD screen illuminates when a button is pressed or the
dial is rotated. The backlight of the LCD screen goes out 10 seconds after the
last setting or action.

7.3 Saving the parameters

● After selecting a parameter, wait 10 seconds; the parameter will be saved.
● A fter selecting a parameter, press the [OK] button; the parameter will also
be saved.
● A fter selecting a parameter, turn off the power switch; the parameter will also
be saved.

7.4 Wireless control

The radio transmitter attached to the camera ("master unit") can directly adjust
flashes ("slave unit") via wireless control.
Parameters set on the radio transmitter will be synchronously reflected on the
flash that is being wirelessly controlled.
35