Turning Your Headset On And Off; Pair It With Your Phone; Wear It How You Like It; How To - Jabra jx10 Bedienungsanleitung

Charge from your desktop holder
Connect your USB cable/AC power adaptor to the desktop holder . Place your JX0 in the
cradle as shown in fig . 3
2

Turning your headset on and off

• Press the answer/end button to turn on your headset .
• Press and hold the answer/end button to turn off your headset .
3

Pair it with your phone

Before you use your Jabra JX10, you need to pair it with your mobile phone.
1. Put the headset in pairing mode
• Make sure the headset is on .
• Press the pairing button marked
2. Set your Bluetooth phone to 'discover' the Jabra JX10
Follow your phone's instruction guide . This usually involves going to a 'setup, '
'connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or
'add' a Bluetooth device . * (See example from a typical mobile phone in fig. 6).
3. Your phone will find the Jabra JX10
Your phone then asks if you want to pair with it . Accept by pressing 'Yes'
or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone will confirm when pairing is complete . In case of unsuccessful pairing,
repeat steps  to 3 .
4

Wear it how you like it

The Jabra JX0 is ready to wear on your right ear . If you prefer the left, gently remove the
earhook and rotate to fit left ear . (See fig. 4)
For optimal performance, wear the Jabra JX0 and your mobile phone on the same
side of your body or within line of sight . In general, you will get better performance
when there are no obstructions between your headset and your mobile phone .
4
.
5

How to...

Answer a call
• Tap the answer/end button on your headset to answer a call .
End a call
• Tap the answer/end button to end an active call .
Make a call
• When you make a call from your mobile phone, the call will (subject to phone
settings) automatically transfer to your headset . If your phone does not allow
this feature, tap on the Jabra JX0's answer/end button to transfer the call to the
headset .
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming call .
Depending on your phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal .
Activate voice dialing*
• Tap the answer/end button . For best results, record the voice-dialling tag through
your headset . Please consult your phone's user manual for more information about
using this feature .
Redial last number*
• Press the answer/end button .
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume . (Show fig 1).
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call .
• Press the answer/end button once to put the active call on hold and answer the
waiting call .
• Press the answer/end button to switch between the two calls .
• Tap the answer/end button to end the active conversation .
* Functions marked with * are dependent on your phone supporting these
features. Check your phone's user manual for further information.
5