Placing The Headset On Your Ear; Using Your Jabra Bt300 Headset - Jabra BT200 Gebrauchsanleitung

Placing the Headset on your Ear

In order to wear the headset please follow these instructions:
1. Place the JABRA BT200
Headset behind your ear.
2. Loop the top of the headset
over the top of your ear.
3. Place the MiniGel into your
ear canal.
4. The microphone will then be
positioned in the direction of
your voice.
8
Using your JABRA BT200 Headset
Turning your headset ON and OFF
To switch your JABRA BT200 on:
1. Remove the headset from ther charging cradle.
2. Press and hold the Multi-Function Button firmly for at least
3 seconds until the indicator light flashes rapidly.
3. Release the Multi-Function Button.
4. The headset will now be switched ON (standby mode) and
the indicator light will continue to slow flash every 3 seconds.
To switch your headset off:
1. Press and hold the Multi-Function Button for 3 seconds
until the indicator light flashes rapidly.
2. Release the button. The headset is now turned off and the
indicator light will no longer flash.
(Please note you will need to wait at least 5 seconds
before switching the headset back on.)
9