Fellowes Easy Glide Montageanleitung Seite 4

STEP 10
Adjust the Lower Arm Swing
• Adjust the swing of the lower arm using the Hex Allen Key
6mm
• Turn clockwise for heavier weights and counterclockwise
for lighter weights
STEP 11
Setup Cable Management
• Remove the Cord Cover on the back of the Dynamic Arm
• Place the keyboard and mouse on the platform and run
cables through the center opening on the lower arm,
along with the monitor cables
• Gather the cables along the dynamic arm and replace the
Cord Cover by pressing until it snaps tight
• Guide the cords through the opening on the base
STEP 12
Adjust the Monitor Tilt
• Adjust the monitor tilt using Hex Allen Key 2.5mm behind
the VESA plate
• Turn clockwise for heavier weights and counterclockwise
for lighter weights
6
Q
6 mm
+90˚
+35˚
0
O
2.5 mm
-5˚
STEP 13
Adjust the Monitor Height
• Adjust the monitor height using Hex Allen Key 5mm on top
of the lower arm
• Turn clockwise for heavier weights and counterclockwise
65˚
for lighter weights
-30˚
8 mm
1/4" Drive
PROPER ERGONOMIC SETUP
USAGE GUIDELINES
15
6 mm
FELLOWES EASY GLIDE™ SIT-STAND WORK PLATFORM 2 YEAR LIMITED WARRANTY
Fellowes, Inc. (the "Company") warrants this product to be free from defects in material and workmanship appearing within 2 years from the date of the original
purchase of the product. If such a defect appears during the warranty period, the Company will (at its sole option) either repair or replace the defective product
with no charge for service or parts or refund the purchase price, provided that the unit is sent to the Company at the customer's expense to the address on the
back of the manual.
This warranty applies only to the initial retail purchaser and does not cover claims resulting from misuse, failure to follow instructions on installation and use,
neglect, use of unauthorized attachments, commercial use, use on a current or voltage other than specified on the product, or unauthorized service during the
warranty period on conditions otherwise covered by the warranty.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, IS EXPRESSLY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
UNLESS REQUIRED BY APPLICABLE LAW, THE CUSTOMER'S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY OR OF ANY OTHER
OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR, REPLACEMENT OR A REFUND OF THE PURCHASE
PRICE, AT THE COMPANY'S SOLE OPTION.
UNDER NO CIRCUMSTANCE WILL THE COMPANY, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES, RESELLERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS
OR EMPLOYEES OR THOSE PERSONS FOR WHOM THEY ARE BY LAW RESPONSIBLE, BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUSTAINED IN
CONNECTION WITH THE PRODUCT. THE COMPANY AND THESE OTHER PARTIES DO NOT ASSUME OR AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO
ASSUME FOR ANY OF THEM ANY OBLIGATION OR LIABILITY OTHER THAN AS IS EXPRESSLY SET FORTH HEREIN.
The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law.
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. The benefits under Fellowes' Warranty are in addition to other rights and remedies under
a law in relation to the machine.
P
124mm
5 mm
+90˚
8 mm
1/4" Drive
45
65˚
-30˚
7